Millions of users are relying on Wavlink extender because they know that this is the only device that can satisfy their daily internet needs. This tiny device comes with outstanding features that offer users to enjoy lag-free internet access all over their home. However, for this, users have to do Wavlink login and set up the extender.
When users opt for the WPS method to configure the extender, then it can easily done by simply pushing of the WPS button on the extender and then on the router.
But, when users opt for the manual method to configure the extender, it can be a bit difficult. Why? Because the manual process requires them to log in to the extender! And, 99 percent of users can’t access the Wavlinklogin page due to some reasons. But, you don’t have to worry! In this article, we will make you familiar with the reasons causing the issue along with the effective solutions to get it fixed at hand. Let’s start!
Reasons: Can’t Access WavlinkLogin Page
The web browser you are using is outdated
You have not accessed the extender’s SSID
Bad location your Wavlink extender
Your extender is not connected to the router
Typos in the web address of the extender
You have used the browser’s search bar for entering the extender’s web address
Now that you are well aware of the reasons causing the “can’t access the Wavlinkextender login page”, scroll down a little know the fixes to troubleshoot it.
Fixed: Can’t Access Wavlink Login Page
Fix 1: Restart Your WavlinkExtender
We haven’t mentioned this in the list of our reasons, but technical glitches can also prevent you from doing extender login. For fixing the issue, we suggest you restart your extender.
Follow the guidelines highlighted below and know how to restart the device in a flash:
First things first, unplug the extender and wait for some time.
Now, plug in back your extender.
Connect your extender and the router.
Now, try to do Wavlinklogin again to see if the restarting process have helped you to fix the issue. If not, then without much delay, you need to try the next hack in post.
Fix 2: Connect Extender and Router in a Proper Manner
You may also experience the login-related issue if you haven’t connected your devices in a proper way. For fixing the issue and to log in to your Wavlinkextender in minutes, just connect the devices securely and firmly either using a wireless or a wired source.
Fix 3: Verify the Ethernet Cable
If you have used an Ethernet source for connecting your devices, ensure that – the cable you have used is working. Apart from this, the ends of the cable must be put into the correct ports of the extender and the router firmly.
Now, try to do extender login again to see if you rack up success with the process. If yes, then using the Wavlink login password:
Log in to extender
Set it up
Update its, firmware, and make changes to the extender accordingly.
Fix 4: Verify Your Internet Connection
On the off chance, you have opted for a wireless source, then you must have sufficient internet range and your extender and the router should be kept in the same room.
You can take care of the distance between your devices, but regarding your internet connection you have to contact your ISP. Confirm if the internet speed you are receiving from his side is speedy.
Fix 5: Update Your Web Browser
Use of an outdated web browser also leads to the extender login issues. To do away with the problem, you just have to update the web browser you are using for the login process.
Fix 6: Cross-check the Web Address
Still going nuts because of the same issue? Yes? Need not to worry! Just cross-check the web address, wifi.wavlink.com you are using for the login process and ensure that it is entered without typing errors.
Bear in mind, spelling mistakes or typos in the extender’s default web address, leads to the Wavlinklogin issues.
Pro Tip: Use Wavlinkextender’s default IP, 192.168.10.1instead of the web address for the login process. But, do not use the search bar! The browser’s search bar is strictly prohibited for either entering the extender’s web address or the IP address.
Did the fixes we have listed in this post help you overcome with “can’t access Wavlinkextender login” page?