In case, you are the victim of the Comfast extender not connecting to internet issue despite achieving Comfast setup success, then you ought to walk through the troubleshooting hacks discussed further in this article. But, before you do so, you need to become aware of the reasons that caused this issue. For that, you have to go to continue reading this guide.
Table of Contents
[Reasons] Comfast Extender Not Connecting to Internet Issue
Discussed in this section are the reasons why you are stuck with the Comfast extender not connecting to internet issue:
-
Your wireless range extender is not properly connected to the router.
-
There is too much distance between the wireless devices.
-
Technical glitches can also cause the issue that you are facing right now.
-
The signals emitted from your networking device are getting interrupted.
-
You have not configured the Comfast extender properly after all.
[Fixed] Comfast Extender Not Connecting to Internet Issue
1. Get Rid of WiFi Interference
As mentioned above, signal interference is one of the reasons why you are experiencing the Comfast extender not connecting to internet issue. Taking this into consideration, you need to keep signal interference at bay. This can only be done if you keep the wireless range extender away from certain things like cordless phones, washing machines, baby monitors, Bluetooth speakers, treadmills, televisions, mirrors, and fish tanks.
2. Reduce the Unwanted Distance
After following the aforementioned hack, see if you are still stuck with the Comfast extender not connecting to internet issue. In case, you are, then you should not waste any more time reducing the distance between the networking devices between them. You will be able to do so by unplugging your wireless range extender from its existing wall socket and placing it close to the host router.
3. Connect the Devices Again
In case your networking devices are not connected properly, then you need to do so by connecting them again. You can do so by disconnecting the cable connecting them, and then, connecting them back again with the help of the cable. Make sure that the Ethernet ports on the networking devices are not damaged. Apart from that, the cable in use should not have any cuts on or in it. Trust us, this will work wonders for you.
4. Restart the Comfast Extender
Are you still experiencing the Comfast extender not connecting to internet issue? Well, it might be because of technical glitches. You can get rid of them by restarting your networking device. In order to restart your device, you need to unplug your device from its wall socket, hold on for some time, and then, do the opposite of the first step. Check again if the same issue is disturbing you.
5. Set Up Your Device Again
Considering you are reading this troubleshooting hack, it means that the Comfast extender not connecting to internet issue is still troubling you. You will be able to do so by setting up your networking device. Doing Comfast WiFi extender setup is possible if you use the WPS method or the manual method. If you want to know the instructions regarding the same, then it is recommended that you refer to the user manual of your device.
Verdict
Here ends this article discussing hacks through which the Comfast extender not connecting to internet issue can be resolved. Apart from the ones mentioned above, in case you are aware of any troubleshooting hack, then it is recommended that you share it.
Wondering with whom? Well, your fellow readers of course. They are the ones reading this same post after all. Chances are that rather than being helped out by the hacks given above, they will get aided by the one shared by you.
Also, what do you think of this article? Did you like walking through it? Whatever your answer is regarding the same, do not shy away from sharing your feedback. The same can be done if you make use of the comment section. Just enter what you have to say in the comment section and hit the Enter key located on your keyboard.