Every Linksys wireless router comes embedded with a firmware. The firmware ensures that your device functions well. Not just that, but your router also gets equipped with security features protecting it from potential threats. To take advantage of these features, many users perform Linksys router firmware update. However, most of them struggle through the process.
Are you also not able to update the firmware of your Linksys wireless router? Well, that isn’t anything to worry about because we are here to guide you. In this article, we have talked about some of the topmost ways through which you can get rid of the Linksys router firmware update failure issue in a matter of minutes. Thus, read on.
Fixed: Linksys Router Firmware Update Failed
Reboot Your Linksys Router
One of the biggest reasons why you are not able to update the firmware of your Linksys router is technical glitches. But, thankfully, these glitches can be taken care of by rebooting your home router.
Follow the instructions mentioned below and get to know how to restart your device:
- Disconnect your Linksys router from the existing modem.
- Power off your router and unplug it from its electrical outlet.
- Wait for a couple of seconds.
- Then, plug your router back into the wall socket and press the Power button.
- Do not forget to reconnect your Linksys router to the existing modem.
Once you are done rebooting your device, try to log in to your device using the Linksys router login IP, and update its firmware. Any luck? No? Well, in that case, keep reading.
Verify the Ethernet Connection
There is a possibility that you are using a worn-out and damaged Ethernet cable to connect your Linksys wireless router and the existing modem.
To troubleshoot the issue, consider replacing your Ethernet cable with a new one. If you have lost faith on a wired source, connect your devices wirelessly.
Bring Your Devices Closer
Perhaps, you have placed your Linksys wireless router too away from the existing modem. If the distance between your devices is too much, it can make it difficult for them to communicate effortlessly.
Thus, make sure that your Linksys router and the existing modem are placed in the same room. But, do not place them too close. Otherwise, the WiFi signals might end up clashing forcing to come across technical issues similar to the one you are struggling with at hand.
Avoid WiFi Interference
Make sure that your Linksys router and the existing modem are not placed near any of the following things:
- Cordless phones
- Washing machines
- Baby monitors
- Bluetooth speakers
- Fish tanks
- Microwave ovens
- Concrete walls
Also, do not place your Linksys WiFi router and modem under or inside a cupboard.
Use the Correct Admin Details
In order to update the firmware of your device to the latest version, you need to access the Linksys router setup wizard. And to access the main dashboard, you need to make use of the correct login credentials.
Thus, if you have used incorrect admin password and username to log in to your device, rectify your mistake right away. In case you are not sure about the login credentials, consider referring to the user manual.
Once you are done following these hacks, walk through the below-mentioned steps in order to update the firmware of your Linksys router.
How to Perform Linksys Router Firmware Update?
- Switch on your computer.
- Launch an internet browser.
- In the address field of your internet browser, type the default web address.
- Press the Enter key.
- You will find yourself on the login page of your Linksys router.
- Input the default password and username and click the Log In button.
- Select Settings > Maintenance.
- Hit Firmware Upgrade.
In some time, the firmware of your Linksys wireless router will get updated to the latest version. If you have an extender and also want to update its firmware, consider accessing the Linksys extender login page, and following the same steps mentioned above.
Hopefully, these troubleshooting hacks will help you get rid of the Linksys router firmware update failure issue.