Linksys routers are grabbing many eyeballs because of their outstanding features, stability, and performance. Users across the globe are satisfied with the internet range they are getting from their Linksys router. If you also want to access continuous internet range on your devices, then you must setup Linksys router.
Despite of receiving top-notch performance from Linksys router, 90 percent of users are complaining that they are facing certain issues with it. And, one such issue is the “Linksys router red light” issue!
If you are also experiencing the same (the red light) issue with your Linksys router, know that we have got you covered. Here, in this post, we are going to provide you some of the best fixes to troubleshoot the issue in a jiffy. Let’s start over!
Fixed: Linksys Router Red Light Issue
Fix 1: Reboot Your Linksys Router
Start troubleshooting the issue by rebooting or power cycling your Linksys router. This is one of the easy fixes to troubleshoot major issues with Linksys router.
Here are the instructions to be executed by you:
- Unplug your Linksys router
- Then, you need to disconnect your internet modem and the Linksys router
- Just sit back and relax for a short span of time
- Reconnect your disconnected devices and then, plug in your Linksys router back
Here’s to hope that after rebooting your Linksys router, the red LED on it has gone away already. On the off chance, you are still struggling with the same issue, try the next hack in line.
Fix 2: Reduce the Excessive Distance
If there is too much distance between your Linksys router and internet modem, then also it may lead to the red light issue. For fixing it, you are supposed to reduce the Linksys router’s and your modem’s excessive distance.
Fix 3: Verify the Connection
If the same issue is annoying you, it means that your Linksys router and modem are not connected to each other in the way they should be. Hence, to do away with the issue, make sure to maintain a finger-tight and secure connection between the two.
For wired connection (recommended): We suggest you use a working Ethernet cable and select the correct ports on your devices for inserting it.
And, for wireless connection: It is advised that you get in touch with your internet service provider first. The reason is, the need of good internet is essential to maintain a stable wireless connection between your Linksys router and modem.
Fix 4: Update Linksys Router Firmware
It is a possibility that the Linksys router’s firmware is outdated and due to that you are continuously seeing red color LED on it. For fixing this, you need to perform Linksys router firmware update using the on-screen instructions provided on its firmware update page. Just use correct Linksys router login username and password to reach it (the firmware update page).
Fix 5: Do Linksys Router Setup Correctly
Chances are that your Linksys router isn’t configured in a proper way. And, improper Linksys router setup is one of the major causes behind getting the red light issue. Therefore, to do away with the red light issue and to make the most out of your Linksys router, be sure to set it up correctly.
That was all about our how-to guide on how to fix “Linksys router red light” issue. Anticipating that the fixes we have provided here will be of great help to you.