Netgear Router Stopped Working

Netgear Router Stopped Working? Here’s the Fix!

Who does not need blazing-fast internet access these days? We all get most of our day-to-day activities done using the internet. But if the internet connection stops all of a sudden then it is bothersome. If you have done a Netgear router setup via but the router has stopped working now, then use the instructions given in this guide to fix the issue. You will get some topmost solutions to your problem. We sure by the time you done following the last hack from this article, you will accessing impeccable internet from your router. Thus go on reading.

How to Fix Netgear Router That Stopped Working

  1. Reboot the Router

Rebooting the Netgear router can help you fix the issue that you are experiencing right now. Rebooting can help in fixing temporary technical hiccups that may be stopping it from working properly.

Thus, go ahead and turn off your router and remove it from the wall outlet. After some time, plug it back in and turn on its power button. Is your router working now? No? Try the next hack.

  1. Update the Router

If you haven’t updated the firmware on your Netgear router recently then the older version of the firmware can be the possible reason for the issues right now. It recommended that the firmware on the router should always updated to the most recent version. If you do not know how to update the firmware on your router then refer to the user manual that you got along with the router at the time of purchase. You simply need to access the Netgear router login page and then get the latest firmware installed on it.

  1. Check Power Connection

A faulty power supply can also be the reason why your router stopped working all of a sudden. For the router to work optimally, you need to provide it with an adequate power supply. Check the power socket into which the power adapter of the router plugged. It should not damaged. Plug the router into some other power socket in such a situation.

Moreover, the power adapter should not connected loosely to the socket. Simply put, the power supply to the router should be optimum.

  1. Contact Internet Service Provider

There is a possibility that the internet connection to the router is not stable. You can verify this from your ISP if there are any internet outages. Let him fix the issue first and then try to access the router’s WiFi.

  1. Verify Wires

You just checked the power cable of your Netgear router. We now want you to have a look at the Ethernet cable that you have used to connect the router to the modem. It should be free of cuts or damages. In any case, if it looks like chewed by your pet or in a worn-out condition, then get it replaced immediately. You also need to take care that the cable is connecting the devices tightly. There ought to be no loose connections.

Reset the Router

If none of the hacks have helped you out so far then resetting your Netgear router should be the best choice for you. This will erase the current settings from your router and the factory settings will restored on it. This will also remove any bug that is the reason behind the issue. You can reset your router by pressing the Reset button located on it. The router should connected to the power supply while you doing this job.


After the reset done, you need to set up your Netgear router again from scratch. You can use the WPS button method or the manual method and set up your router. So access the Netgear router login page via and set up your router. Once you done, you will no longer be troubled by the same issue.

Leave a Reply

Your email address will not be published. Required fields are marked *