Unable to tweak the setting of your Netgear WiFi range extender? Do you want to access Netgear Genie setup wizard but fail to do that? If your answer to these questions is a big yes, then this post is meant for you.
Through this piece of writing, we’ll make you aware of the reasons why you aren’t able to access the Netgear Genie setup wizard. In addition to that, we’ll also provide you with some troubleshooting tips to resolve the issue in minutes. Let’s take the plunge!
Resolved: Unable to Access the Netgear Genie Setup Wizard Issue
Is Your Netgear Extender Receiving Proper Power Supply
Reason: One of the common yet major reasons why aren’t you able to access the Netgear Genie setup wizard might be because your device isn’t receiving adequate power supply.
Fix: Ensure that your Netgear WiFi range extender is properly connected into a working and damaged-free wall outlet. In the event that the wall-plug is damaged, do not plug in your extender. Once you’re done with it, make sure that the power LED on your Netgear extender is stable and green.
Are You Connected to the Correct Network?
Reason: If you are not connected to correct network, you will not be able to access the Netgear Genie setup wizard. Think about it! You are not able to access the Netgear Genie setup wizard because of a wrong WiFi network. Seems bad, isn’t it?
Solution: Make sure that you are connected to extender’s WiFi i.e. Netgear_ext while accessing the setup wizard of your device.
Is Your Netgear Extender Connected to Your Home Router?
Reason: Another reason that is stopping you from accessing the Netgear Genie setup wizard can be no or poor Ethernet/ WiFi connection between your range extender and router.
Solution: Make your that your Netgear extender is connected to your home router properly. In case of wired connection, it is also recommended that you use a working and non-damaged Ethernet cable to connect your home router and Netgear extender.
Seek help from our technical experts if you want to connect your devices wirelessly.
Are You Using the Correct Login Web Address?
Reason: If you are not using the correct web address to log in to your device, then also you will not be able to access the Netgear Genie setup wizard.
Solution: Be very careful while entering the web address i.e. mywifiext of your device in order to access the Netgear Genie setup wizard. On the off chance if you face mywifiext not working issue, then it is best that you make use of the default Netgear extender IP address i.e. 192.168.1.250.
Bonus Tip: Use the updated version of the internet browser only. Mywifiext or 192.168.1.250 does not work on an outdated web browser.
Have You Updated Your Netgear WiFi Range Extender?
Reason: When was the last time you updated Netgear extender’s firmware? There are chances that ages have passed when you updated Netgear extender firmware, right? Don’t remember?
Solution: An outdated firmware version on your device can be another reason that is preventing you from accessing the Netgear Genie setup wizard. In order to fix the issue, you need to log in to your Netgear extender using mywifiext web address or 192.168.1.250 IP, search for the updates available, and if you found any get it done by following the step-by-step instructions.
In a Nutshell
Once you are done with updating extender’s firmware, you will be able to access the Netgear Genie setup wizard for sure. In the event that you are still unable to access the Netgear Genie setup wizard, do not hesitate to get in touch with our technical experts. Contact us via comments for immediate help.