Trying to access the Comfast extender setup page using IP address i.e. 192.168.10.1 to configure the basic and advanced settings but the Comfast WiFi extender not working issue arises. Well, there are various reasons why this issue comes. Some of the common causes listed underneath:
- Your Comfast extender and your router are not connected to each other.
- The extender can’t detect the SSID.
- Your client device is not connected to the extender’s network.
- The Comfast extender is connected but has no internet.
Now, let’s go through the fixes listed below and troubleshoot the issue, shall we?
Table of Contents
Check Cable Connection
Make sure that your Comfast extender is connected to your home WiFi network before proceeding with the Comfast extender setup. To do so, grab an Ethernet cable and use it to connect your Comfast extender and host router properly with each other.
Connect Client device to Comfast Extender
Sometimes, an improper wired or WiFi connection between your Comfast extender and computer or laptop doesn’t allow the device to work smoothly. So, in order to access the Comfast extender setup page using 192.168.10.1, confirm that your client device is properly connected to the extender.
Wait till the power LED on your Comfast extender becomes solid green before having access to the Comfast extender setup page.
Check the Power Supply
The insufficient power supply may also prevent you from accessing the Comfast extender setup page. To troubleshoot this issue, make sure that your Comfast extender receives a fluctuation-free power supply from the electric outlet.
Power Cycle the Comfast Extender
If you haven’t restarted or power cycled your Comfast extender since ages, then it’s time to do so. In the event that you reboot your Comfast extender at least once a week, then you will surely fix issues with it on your own. To power cycle, your Comfast extender, follow the step-by-step instructions listed below:
- The first and foremost thing that you need to do is to detach your Comfast extender from your router and laptop.
- After that you have to do is – remove your Comfast extender from the wall socket.
- Wait for a few minutes. Till then you can have a cup of – tea or coffee.
- Insert the Comfast extender back into the power source.
- Now, connect it to your host router.
- Using the Comfast extender admin details, try to access the setup page again.
Check the WiFi Connectivity
Chances are that your ISP is the culprit and the device provided by them is not allowing you to access the Comfast extender setup page. So, what you have to do is to contact your service provider and ask them to upgrade your internet plan and the device. Also, verify from them if all the internet bills are clear from your end or not.
Verify the Internet Browser
If the web browser you are using outdated or loaded with junk files or browsing history, then also it will prevent you from accessing the Comfast extender setup page. So, to access the Comfast extender setup page without any hassle, ensure to update your internet browser and also clear your browsing history and junk files.
Note: This tip can also help you access the setup page to log into Comfast extender (if you own the one!), access its web-based setup page, configure it, and change its settings.
In a Nutshell
Have the troubleshooting tips provided above helped you out to access the Comfast extender setup page using 192.168.10.1? Apart from this, make sure that Comfast Firmware update is not available. If yes, upgrade it immediately. Do share your feedback with your fellow readers via comments.