Experiencing signal-dropping issues with your D-Link extender can be frustrating, but there are several steps you can take to address and potentially resolve the problem. This article comprises a step-by-step guide to help you fix the D-Link extender signal-dropping issue. You will need to log in to your extender using the dlinkap/local page. So keep handy the login credentials.
Fixed: D Link Extender Signal Keeps Dropping
Change the Placement of the Extender
Ensure that your D Link WiFi extender is placed in an appropriate location in your home. It should be placed within a reasonable range of your main router. Plus you should choose a place where there are fewer obstructions such as walls, furniture, etc. Other electronic devices that might interfere with the WiFi signal should also be kept away from the extender.
Change WiFi Channel
If there are multiple WiFi networks in your neighborhood, WiFi interference might be causing signal dropping issues. You can use a WiFi analyzer tool to determine which channels are less crowded. Now, set your D Link wireless range extender to use one of those channels by changing from the channels that are more crowded.
Check Electricity Supply
Be very certain that the electricity source to which your extender is connected is well working. Fluctuations or power outages could lead to connectivity issues. So, make sure that the power supply is non-fluctuating. You can put to use a UPS if you feel the need to do so.
Update Wireless Drivers
If you’re experiencing signal dropping on your devices while connected to the D Link WiFi extender, make sure the wireless drivers on the connected devices are updated. Outdated drivers can cause connectivity problems. So go ahead and make the necessary changes.
Change Wireless Frequency Band
Most of the DLink extenders support both 2.4GHz and 5GHz frequency bands. You should try switching to the less congested band to see if it improves the WiFi signal stability. For this, you need to access its settings using the login URL.
Check Extender’s Settings
Verify that the settings on your DLink extender are configured in a proper manner. Check the wireless security settings, SSID, and other relevant configurations. Make changes to it if you feel there is some that needs to be done.
Sometimes, a simple reboot can solve connectivity problems. Poor connectivity issues with the extender can also be resolved using this process. Unplug your D Link extender from the power source, wait for a few seconds, and then plug it back in. This completes the reboot process. You should now try connecting to its network.
Reset Extender to Factory Settings
If the problem persists even after trying all the above given tips, you can try resetting your D Link extender to its default settings. This should be a last resort, as it will erase any custom configurations that you’ve set up on the extender. You can always refer to the extender’s user manual for instructions on how to perform a reset. Once the extender has been reset, you should set it up once again from the very beginning.
Get Firmware Updated
As soon as you are done with setting up your extender, check if there’s a firmware update available for your D’Link extender. Outdated firmware can also lead to performance and connectivity issues. You should visit the D-Link support website and download the firmware for your extender. Make sure you download the correct firmware file. For instance, if you have D’Link DAP 1610 setup done then download the firmware that is meant for this model. After that, log in to the extender and follow the instructions to update the firmware.
The Final Note
This way you can fix the signal dropping issue with your D Link extender. We are sure once you have updated the firmware after setting it up, you will notice a drastic improvement in its performance. Now onward, keep an eye on the firmware updates for your extender. Once an update is ready, get it installed on the device as soon as possible. Simply put, keep your extender updated with the most recent firmware version all the time.