If you are trying to update the firmware of your Netgear router but fail every time, then chances are you are up to something wrong. Well, there is not just one reason behind getting the firmware update failed issue. Plenty of reasons are out there. But through this piece of writing, we will make you familiar with the topmost reasons why your Netgear router firmware update failed. So, without much delay, let’s get started!
Why did Router Firmware Update Failed?
Go through the reasons listed below and know why your Netgear router firmware update failed. Also, we have provided the solutions to the reasons – so that if any one of the reasons you are facing – you can easily deal with them by applying the solutions provided along.
Reason 1
One of the common yet major reasons why your Netgear router firmware update failed because you have selected the wrong firmware version.
Solution
To get rid of the issue, ensure that you have selected the correct firmware version as per the device model you are using. Navigate to routerlogin.net setup wizard to download the correct firmware version for your device.
Reason 2
Chances are that you don’t have an active and stable internet connection to perform the Netgear router firmware update process and due to this you are facing the brain-hindering issue.
Solution
In that case, we suggest you contact your ISP and ensure that you have a fast internet connection. Apart from this, ensure that all your pending internet bills are clear.
Reason 3
Possibilities are that your modem and Netgear router aren’t connected in a proper way and that is giving you firmware update failure issue.
Solution
To get the issue fixed, make sure that your modem and the Netgear router are well connected. Besides, the Ethernet cable you have used for connecting your devices must be well working. And, if you have used a wireless source for the same, ensure that you aren’t connected to an unknown or free WiFi hotspot.
Once you’re done, check the connection between your devices by accessing the Netgear router login page.
Reason 4
Another annoying reason why the Netgear router firmware update failed because of the use of an incorrect web address. Besides, chances are that you have made typos in the web address or you have entered it in the browser search bar.
Solution
To do away with the problem, ensure that you have used the correct web address, www.routerlogin.net to access the Netgear router’s firmware update page. Additionally, we suggest you enter www.routerlogin.net without any typing errors in the browser’s URL field only.
Are you still stuck with the Netgear router firmware update failed issue? If so, then it’s high time that you power cycle your device. Yes, you read it right! Sometimes, a minor technical hardware or software-related glitch can stop you from downloading the firmware on your Netgear router.
So, the only option that you are left with is to power cycle or restart your Netgear router. To power cycle or restart the Netgear router, do the following:
Step 1: First of all, disconnect your modem and other connected devices from the router’s WiFi.
Step 2: Then, unplug your Netgear router from the wall socket.
Step 3: Wait for a couple of minutes.
Step 4: Let your router take some rest. Allow it to be cool down. Then, plug in your Netgear router back.
Step 5: Allow the LEDs on your Netgear router to become lit and green.
Now if you have successfully restarted your Netgear router, you can try to download the firmware version on it by using the default routerlogin credentials (if not changed).
Verdict
That was all about our post on how to fix Netgear router firmware update failed issue. Was this article helpful? Please share your feedback with us. However, if you are getting the same error, without much delay, shoot all your queries into the comments section.