Overcoming Wavlink Extender Not Working: Proven Solutions

Is your Wavlink extender not in the mood of working properly? Have you been experiencing this issue despite finishing the Wavlink extender setup process in a hassle-free manner? Well, you are not the only one who has been going nuts due to issue. There are several users who have been not able to make the most of their networking devices due to the same problem.

We have assisted many out there; we can assure you that we can help you as well. Taking this into consideration, you ought to read the solutions given in this article and learn how to make your extender work to get back online.

How to Fix Wavlink Extender Not Working Problem?

1.   Power Cycle the Wavlink Extender

The first reason why you are experiencing the extender not in the mood of working issue is the existence of technical glitches. To get rid of these glitches, you ought to power cycle your wireless range extender. Confused as to what does the term power cycle mean? Well, it is just a fancy term used for restart or reboot. FYI, this fix can also be used to fix the ap.setup not working issue.

Thus, you just have to reboot your networking device by pressing the power button located on it. Make sure that after a period of time, the LED light becomes solid green acting as an indication that your device is powered on.

2.   Use a Non-Damaged Ethernet Cable

Another thing that can be done from your end to resolve the Wavlink extender not in the mood of working issue is to check whether the Ethernet cable in use is damaged or not. In case it is, you should use a non-damaged Ethernet cable for the establishment of the connection between your networking devices, i.e. the Wavlink range extender and the host router.

Make sure that the new Ethernet cable is not damaged from any point. Along with this, the Ethernet ports located on the devices should not be damaged. At last, the connection ought to be finger-tight.

3.   Pull the Networking Devices Closer

Did the first and the second troubleshooting solution failed to help you fix the Wavlink extender not in the mood of working issue? Well then, it could be because of the networking devices are kept in separate rooms of your home. This might be making it difficult for their signals to get transmitted to every nook and cranny of your house.

Taking this into account, you ought to bring the networking devices a tad bit closer. We are emphasizing on the term tad bit because keeping the devices too closer will ensure that their signals clash thereby causing more issues.

4.   Upgrade the Wavlink WiFi Extender

Still can’t get luck to resolve the Wavlink extender not working issue? Well this could be because you left the firmware upgrade notification on read and did nothing about it. Given this, it is recommended that you upgrade the firmware of your Wavlink wireless range extender to the latest version. The same can be done if you walk through the steps given in the product manual.

You ought to know that whether you brought the AC1200 extender to perform Wavlink AC1200 setup, or any other model, every extender comes with a user manual. Your networking device would have come with one as well.

The Bottom Line

Experiencing the Wavlink extender not in the mood of working issue has given many users a severe headache. Considering you have been amongst them, we are anticipating that after reading the troubleshooting solutions presented above, you will be able to resolve the issue in debate. By any chance, in case you are not able to, then waste no more time to reset your device.

Now, the question is, how can the process be taken forward. Well, it is quite simple. You just need to walk through the steps given in the user manual of your wireless device to reset it. You might have got it at the time of purchase.

As soon as you have restored the device to the default value, set it up from scratch using the manual method or the WPS method. The method which you will choose is totally your choice.

Leave a Reply

Your email address will not be published. Required fields are marked *