Networking devices like Netgear extenders can misbehave when it used continuously without giving any relaxation time. And nowadays, users face the Netgear extender not working issue due to which they are not able to access the Netgear_ext SSID. If you are also sailing into the same boat and trying to find out the reasons to fix the trouble, then you have come to the right place.
In this article we highlighted all the common reasons that lead to this issue and also give some effective and suitable solutions to you so that you can fix it in a hassle-free manner. We highly suggest you read out the post. You surely resolve the trouble. Read on!
Well, before we jump into the troubleshooting tip. You need to know the reasons that trigger this issue. Below we mentioned some common causes. You just need to focus on the:
Table of Contents
Reasons: Netgear Extender Not Working
Insufficient Power
You can experience this issue due to insufficient power supply from the electricity source. Maybe the wall outlet in which you plug the extender is damaged or shot circuit.
Usage of Faulty and Damage Cable
If you use the Ethernet cable and power cables for the connection of the extender with router, then there is a chance that cables are damaged from somewhere that causes this issue.
Outdated Firmware
The old version of the firmware also causes this issue because the outdated version keeps stopping the functions of the device and put the device at higher risk.
Wrong Placement of Extender
The placement of the extender is an important part to get the best performance from the device. If you place your device near home appliances or metal objects then you might face issues.
No Internet From ISP
A poor internet connection from the internet service provider also could be the reason why your device not working properly.
The factors discussed above can be the reasons why the Netgear extender not working. Now let’s move to the next section in which we elaborate on some hacks.
Fix: Netgear Extender Not Working
It is very important to eliminate the extender not working issue. The below mentioned solution will assist you to get rid of it.
Restart the Extender
The very first thing you need to do is reboot the extender to get the best out of it. By rebooting the device you will remove the technical glitches from the device that lead to this issue. You can follow the following steps to restart the device perfectly.
- First, remove the plug of the extender from the wall outlet.
- Second, wait for some time to recover the device from technical glitches.
- Third, plug the device back into the wall outlet.
Turn on the device and check the extender to ensure it is working or not. If not then, move to the next hack.
Check Electricity Source
Now, you should check the electricity source in which you plug the extender because some time power socket is damaged which does not supplies the sufficient power supply. So, we suggest you check out the wall outlet. If you found any damage while checking, then try to change the socket or repair it if possible.
Update Firmware
As we already mentioned above outdated firmware usually causes this issue on the extender. So, check the firmware of your device by accessing the 192.168.1.250 default IP address. If you found old firmware, then update it at the same time.
Conclusion
Now, you know why your Netgear extender not working properly. We hope the above-mentioned troubleshooting tips will assist you to fix the issue. Once the extender is start working, you will able to get high-speed internet.